Material selection for an unmanned rotary wing aerial vehicle airframe

Authors

  • Andrea Osorio Pemberthy Universidad Pontificia Bolivariana
  • Andrés Tamayo Toro Universidad Pontificia Bolivariana
  • Juan Pablo Alvarado Perilla Universidad Pontificia Bolivariana
  • Germán Alberto Barragán De Los Ríos Universidad Pontificia Bolivariana
  • Germán Urrea Quiroga Universidad Pontificia Bolivariana.

DOI:

https://doi.org/10.18667/cienciaypoderaereo.6

Keywords:

Metallic materials, selection of materials, Unmanned Aerial Vehicle (UAV)

Abstract

 This article discusses the selection and analysis of materials for the manufacturing processes of the main structure for a rotary wing Unmanned Aerial Vehicle (UAV). The selection of materials was carried out through the use of several of the typical selection methodologies presented in the literature, such as the morphological matrix. Restrictions associated with aeronautical use and local availability of materials were taken into consideration.

Downloads

Download data is not yet available.

Author Biographies

  • Andrea Osorio Pemberthy, Universidad Pontificia Bolivariana

    Aeronautical Engineer, Universidad Pontificia Bolivariana

  • Andrés Tamayo Toro, Universidad Pontificia Bolivariana

    Aeronautical Engineer, Universidad Pontificia Bolivariana

  • Juan Pablo Alvarado Perilla, Universidad Pontificia Bolivariana

    Aeronautical Engineer, Associate Professor of Aeronautical Engineering, Universidad Pontificia Bolivariana

  • Germán Alberto Barragán De Los Ríos, Universidad Pontificia Bolivariana

    Aeronautical Engineer, Master's in Air and Airport Transport, Assistant Professor, Department of Aeronautical Engineering, Universidad Pontificia Bolivariana

  • Germán Urrea Quiroga, Universidad Pontificia Bolivariana.

    Aeronautical Engineer, Assistant Professor, Aeronautical Engineering, Universidad Pontificia Bolivariana

Downloads

Published

2013-09-01

Issue

Vol. 8 No. 1 (2013): Enero - Diciembre

Section

Operational Safety and Aviation Logistics

License

Assignment of Copyrights

 Authors assign Ciencia y Poder Aéreo journal the exclusive rights (reproduction, distribution, public communication, and transformation) to exploit and commercialize their work, in whole or in part, in all the formats and modalities of present or future exploitation, in all languages, throughout the life of the work and throughout the world.

All contents published in Ciencia y Poder Aéreo journal are licensed under a Creative Commons Attribution 4.0 International License, whose complete information is available at http://creativecommons.org/licenses/by/4.0/ 

Under the terms of this license, users are free to download, print, extract, archive, distribute and publicly communicate the content of articles, provided that proper credit is granted to authors and Ciencia y Poder Aéreo, scientific journal of the Graduate School of the Colombian Air Force. Except when otherwise indicated, this site and its contents are licensed under a Creative Commons Attribution 4.0 International License.

For other uses not considered under this license it is required to contact the Director or the Editor of the journal at the e-mail address cienciaypoderaereo1@gmail.com. 

The Graduate School of the Colombian Air Force and this publication are not responsible for the concepts expressed in the articles, including the metadata or the affiliation stated by authors. This is the full responsibility of the authors.

Creative Commons License 

How to Cite

Material selection for an unmanned rotary wing aerial vehicle airframe. (2013). Ciencia Y Poder Aéreo, 8(1), 42-46. https://doi.org/10.18667/cienciaypoderaereo.6